RollerCoaster Tycoon 3

This set is easy to use because it has standard pieces. But you can also use it in combination with shy's planters.
This set lets you make more special paths with curves and more. I have also added a conforming piece of path so you can make it go up a hill.
Author: briantjuh94
Author/Creator: briantjuh94

This set is easy to use because it has standard pieces. But you can also use it in combination with shy's planters.
This set lets you make more special paths with curves and more. I have also added a conforming piece of path so you can make it go up a hill.
Author: briantjuh94
Author/Creator: briantjuh94

Just a simple CSO. 🙂
Author/Creator: RCTER2

The last scene of central plaza Disneyland Paris before the celebrations of the twentieth anniversary.
This CSO contains borders, lamps, loudspeakers and the central scene.
Author/Creator: Thiery/PLT

A lift tunnel for Space Mountain.
___________________________________________
Author: Mattatt14
Author/Creator: Mattatt14

Star-covered catwalk piece for Space Mountain.
___________________________________________
Author: Mattatt14
Author/Creator: Mattatt14

A Tomorrowland sign.
___________________________________________
Author: Mattatt14
Author/Creator: Mattatt14

Space Mountain Dome and Base.
___________________________________________
Author: Mattatt14
Author/Creator: Mattatt14

A Set to build Space Mountain from Disneyland, CA.
___________________________________________
Author: Mattatt14
Author/Creator: Mattatt14

Greenish Blue Bricks, Old Grey bricks, Swirly Slate, and Worn Brown Bricks for your enjoyment.  Version 2 is only a more refined version of the original with larger, more realistic bricks, 1/4 tile placements, and new recolorable versions of the originals.
All pieces are fully conforming, 1/4 placement, and using shared textures. 112 pieces in total.  Should work well up against any other path covers and edges.  
*Make sure to remove any older versions before installing
**Interlocking blocks texture from version 1.2 or earlier removed because they did not go seamless on all rotations, and did not match the rest of the set.
Author/Creator: Shiggs713

This is the Rita sign you see on the Entrance tire to the ride, located in Alton Towers, Staffordshire, England.
Hopefuly this will come in handy in a Rita or dark forest recreation.
Feedback appreceated.
🙂
NOTE:
The tire seen in the picture is from Rusty Road's Speedway Set & The path covers are my own Alton Towers Brick Path Covers
Author/Creator: RCTBlizzard

Released 25/09/09
Here is my Efteling Pack with: vogelrok ingang (v2), vogelrok skelet, vliegende fakir, draak lichtgeraak and the trollenkoning! You can delete vogelrok ingang v1!
Enjoy it!

Author: BN
Author/Creator: BN

This is not available anywhere else because universe of rct3 shut down so I'm posting it here.
It contains the logo, entrance, queue line, main building, gravity building, and the station and exit
All you need to make a rock n' rollercoaster in paris easier
Author/Creator: Dara223

Credits:
--------
- The basis for the model file for one of the coke machines and the pepsi machine as well as the texture for this coke machine was provided by iceatcs.
- The texture for the other coke machine was provided by by Marnetmar
- The textures for the Pringles machine, the Japanese buddhist amulet vending machine and the Japanese coke machine are based upon images from Wikipedia released under the Gnu Free Document License (http://www.gnu.org/licenses/fdl.txt). In accordance with this license the respective textures are included in the "GFDL textures" folder and released under this license.
- The icon for the billboard machine submenu is part of the Crystal Clear icon set by Everaldo (http://www.everaldo.com, LINK), which is distributed under the terms of the Lesser General Public License (http://www.gnu.org/licenses/lgpl.txt).
Note: This icon will only be visible for Mac and unpatched vanilla users. It clearly indicates not to touch the contained objects which will crash the game for those users =)

Install:
--------
Copy the "belgabor-Really Custom Generic Stall Set" folder into the the StyleThemed folder of your Roller Coaster Tycoon 3 installation directoy.
Note: Copy the folder itself there, NOT only its contents! Also make sure your unzip program does not trash the folder structure.
Do NOT extract this readme file or the "GFDL Textures" folder there (or delete it before you start RCT3).

Usage:
--------
All the stalls in this set are "nude", the don't contain any model, only the required effect points and one face necessary to make them clickable. This face encompasses most of the RCT3 square you place the stall on. The best way to hit it is to click in front of the feet of the vendor. This face is invisible from the top, but has the green blob texture from below, so don't use these stalls floating in the air =)
All the stalls can be found in the last cathegory (with the toilets etc).
The icons for these stalls indicate approximately where customers (red arrows) and the vendor (blue arrow) will stand. The green square represents the RCT3 square you place the stall on, the green arrow corresponds to the arrow you see when placing the stall.
The two machines stalls have a shrinked vendor that will dissappear within one of the placed machienes, therefore it isn't indicated on the icons.
The other stalls come in three versions each, one with a normal sized vendor, a teenage sized vendor (slightly taller) and a adult sized vendor (quite taller). The following stall types are included:
- Normal. Same effect point setup as the generic stall that comes with the game.
- Close to the path. Effect points moved half a square towards the path. Due to the peep animation when leaving teh stall this can look a bit odd.
- Far from the path. Effect points moved half a square away from the path.
- Diagonal. Normal effect point setup rotated 45 deg left or right around the centre of the square.
Also included are recolourable basic desks for normal and diagonal stalls and a cash register for them.
In regards to machines, there are 8 fully textured ones and 6 different one with a billboard front. The other sides of those are recolourable.
Author: Belgabor
Author/Creator: Belgabor

This set contains several invisible things, some new, some already done by other people. The latter ones were included to have all invisible things in one set, so people don't need to go set-hunting to find a certain invisible piece. It is not my intention to "steal" the idea form the original creators.

This set is dedicated to the memory of

Arthur C. Clarke
(December 16, 1917 – March 19, 2008)
and
Gary Gygax
(July 27, 1938 – March 4, 2008)
two men who shaped fields of interest dear to me.
requiescant in pace.

Contents
This set contains the following new and old invisible things:
Path (new one, you do not have to sacrifice an original like in DasMatzes tutorial)
Queue (dito)
Fence (as in one of Shyguys sets)
Ride Entrance (similar to errt's and Vodhin's set, vendor shrinked into oblivion)
Ride Exit (probably exactly like errt's and Vodhin's)
Park Entrance (iirc someone already did that as well, but can't remember who)
Toilet, ATM and First Aid
Two simple Stalls that have the same setup as the generic one.
Path Extras: Litter Bin, Sign, Bench, Vista Point, Passport Machine
Changing Room (supercedes my other set)
Two special pieces dedicated to Arthur and Gary
Author/Creator: Belgabor

This was my first piece of custom scenery ever made a few years ago when I was eleven. It is a simple marble stand with a drink sign and a YAY! sign to go on the sides. They are attachable (Not all one) and is convenient anywhere! Special thanks to shyguy for recovering this file from the long lost Vodhin.org.  🙂
Author/Creator: Coasterboy

This is the BETA release of my Water Works CS Set. This set was designed to expand the capabilities of water parks by adding curve pool decks and railings, as well as slide exits, pool chairs, and more rafts. As stated, this is the beta for the set. 
Note: This post has been updated on 4/20/13 to re-add the download. No further changes have been made to the set, as I've not touched the game in months.
Author/Creator: LostThought16

Beams, walls, decking, rope bridges and a thatched roof to create a tree house in the jungle. 113 pieces in total 🙂
Author/Creator: StationJimJr

Hey all!
Here is my set that goes on either the inverted coaster or flying coaster's station. These are NOT animated.
Author/Creator: CoasterBeta

A set with beams.
The basic 1h,2h,3h, etc.
But also loose diagonal/ hd1/ 0,5 by 1 RCt3 tile beam
Big Thunder Mountain like supports
details for making windows/fences/etc.
You can just do a lot of things with it!
Objects: 116
Author/Creator: Pat

Contains Drains, planter boxes and asphalt covers
Place in style/Themed folder.
Author:  Aceana
Author/Creator: Aceana

156 pieces in total from walls to windows, pillars to partitions and beams to bonsai trees! Have fun! 🙂

EDIT: Version 1.2 - The objects are exactly the same as v1.1, the only difference being that I've moved a third of the items into the flowers menu to help navigate better.
EDITED EDIT: A fault with v1.2 meant that the objects in the foliage menu snapped to the ground when placed. This has now been fixed in v1.3. Apologies for the inconvenience, it won't happen again! 😝
EDITED EDITED EDIT: V1.4 - The objects formerly found in the foliage menu have now been moved to the scenery/scenery items menu thus stopping them annoyingly appearing outside your parks!  🙄
IMPORTANT - If you have v1.1, v1.2 or v1.3 installed, you'll need to delete it from your themed folder completely and then install the new version. If you simply overwrite it, the objects in the scenery menu will not show up.
Any items already in your parks will not disappear (I've checked 😝), this is just to split up the amount of objects and to fix bugs.
Thanks 🙂
Author/Creator: StationJimJr
 

132  furniture items to spruce up your interiors! Chairs, beds, lights and an Atari 2600 😄 Have fun!
Author/Creator: StationJimJr

Hollywood Tower of Terror
Author: Beefstu
Author/Creator: Beefstu

Working speakers pack.
Author:Battor77
Author/Creator: Battor77