Wilhelm1407

Thank you! I love inversions that interact with paths.

Canyon Blaster | Western Themed B&M Floorless This is the first project I uploaded to my YouTube channel after the great copyright purge of the 2010's, and the deletion of my old account. After that for a few years I focused on making parks on ShyGuy's World and RCT Lounge forums. Eventually I decided to get back into making roller coaster videos. I wanted to make something really unique for my first new video. Canyon Blaster is a western themed floorless coaster that is built into a man made canyon. I though what if Big Thunder Mountain was more for thrill seekers, and what is a B&M coaster type that would be cool to see with lots of theming? The coaster starts off inside a mine, then travels up to the top of the canyon, and sends riders through the first of eight inversions before dropping down the first drop. The coaster then dives and twists through the canyon, and the remaining seven inversions.

It's been a while since I worked on this project. The supports are... a bit of a nightmare to say the least. I've just been doing a little bit at a time but finally started getting these high speed turn supports to a point where I think they look okay. Still a lot of work left to do on just this section alone

I'm going to merge this over into the "I Search a CTR, CFR, CT" Thread, as it's for searching for custom attractions, as well as technical support. If you could link the CTs you're trying to use that would be most helpful.

The only way to find it's way out... Gotta play some Kate Bush lol

I started working on this sometime back in 2022 when Stranger Things season 4 was released. The concept in my mind is passengers enter the old Creel house, and the station is similar to that of Poltergeist at Six Flags Fiesta Texas. However instead of launching straight out of the station, the trains roll forward into a dark show room, with projector screens like that in The Mummy's Revenge at Universal Studio's Orlando. The sound of the clock chimes is heard and riders will hear Vecna's voice saying "It is time..." as the chimes continue. The trains then launch down a tunnel into the main building housing the spaghetti bowl. The inside of the main building will be made up to look like the inside of the Upside Down in Season 4, and will have backdrops all the way around. It'll be complete with particle effects and flashes of red lighting (a lot of this will have to be editing at least for the lighting and projector screens). Riders are twisted and turned upside down seven times before escaping back to reality. This project will obviously take quite some time to complete, but hopefully I'll complete it by the time the new season is released.

I always wondered what it feels like to ride one of those. I've never had the chance to get out to Cali to ride X2. I think it's a shame it's such a rare coaster type, though I understand how expensive they are to build. Arrow had smaller designs that I wish S&S would consider making. Also ironically I didn't realize one of the models they had designed was called Delirium before I created this design in RCT3. I got these out of an Arrow Dynamics Product Digital Brochure for their 4D Coasters. QUANTUM OCTOPHOBIA DELIRIUM

DELIRIUM | S&S Multidimensional Coaster Delirium is the first and only S&S 4D coaster I've created. I used TycoonCoaster's Multidimensional Coaster CTR to create this coaster. I decided to use extended track in order to create new inversions that would be unique to multidimensional coasters. The supports are made with Moby's Steel Jungle V1 & V2.

The Rake | Gravity Group Timberliner Coaster I'm re-posting this project within the thread, as for some reason I put two projects in one post. But I hadn't thought of the table of contents yet... so here we are! Now it can have it's own hyperlink! The Rake is a creature I learned of through Creepypasta. I genuinely find it really creepy and I felt it would be a good theme for a wooden terrain coaster. I'd like to do a remaster of this project in 4K and extend the pre-lift tunnel eventually. If you want to read the creepypasta story here's the link to the page on The Rake.

Yeah I'm not even sure if it would be a successful concept if it was really done. GCI has steel spine track for their infinity flyer inversions, but those also have steel rails. Having wooden rails on something like this would probably be a technical nightmare. And I also can't believe I made this 9 years ago cause i remember working on it very vividly lol Maybe one day I'll attempt something similar in Planet Coaster.

AMALGAM | Wooden Hybrid Concept This wooden hybrid coaster concept is different than any of the other hybrids I've made. The track, is comprised of a steel spine, and steel cross-ties, with wooden rails. Due to the base of the track being steel, the supports are designed more closely to a typical steel coaster. The layout includes a lot of air time, as well as a vertical loop, and an underground tunnel. For the first draft of the concept I had used Maylene's Millennium Flyer's. However I decided on using Parallax's Timberline CTR to create the final version of this project, and for the supports I used a mix of Moby's Steel Jungle V1 & V2, as well as Moby's Glasshouse and Frameworkx.

That would be a great tutorial to have if it hasn't already been made! I can start making a tutorial on how to put cars on other tracks as well. No rush of course cause I know how time consuming it can be just to work on creating and editing custom attractions lol

I merged the "CTR and CFR Requests," thread since we already have this thread. You can get help looking for custom attractions here, as well as request custom attractions. I personally can only put cars on different tracks and can't model anything. But you may find a member of the community here who would be willing to help with other things. Or at least that was part of my hope creating the thread.

Wilderness Run | RMC Hybrid Coaster This coaster is the first RMC hybrid coaster that I attempted in RCT3. I used Brandon & Cristian's Log Mine CTR on Extended Track. Nowadays I would have used Samplerocker's Track 11 Edits, and for the supports I would use Big Burger's Timber 2.0 and CSF's Steel I Beam Set for supports... However I used Big Burger's Timber 2.0 and Moby's Steel Jungle v1 for the supports on this creation.