RollerCoaster Tycoon 3

TRIVIA: These supports were inspired by, the loop supports on Tennessee Tornado, at Dollywood.
 
NOTE: These are STRUCTURE FILES and not their own custom scenery set. The following sets will need to be downloaded to use them!
 ◉ Moby's Steel Jungle V1 & V2
   https://parkcrafters.com/files/file/661-mobys-steel-jungle-v1-v2/
 ◉ Techno's Coaster Essentials - Arrow Footers
    https://parkcrafters.com/files/file/3184-technos-coaster-essentials-arrow-footers/
 
 ◉ CPCisco's B&M Footers
   https://parkcrafters.com/files/file/504-cpciscos-bm-footers/
 ◉ Coasterfreak90's Mega Coaster Additions
   https://parkcrafters.com/files/file/3377-coasterfreak90s-mega-coaster-additions/
 
 ..::INSTALLATION::..
 Place the DAT Files
 Corkscrew Modern Large Loop LEFT
 Corkscrew Modern Large Loop RIGHT
 into your RCT3\Structures folder located in your user documents.
 [Example]
 
 C:\Users\UserName\Documents\RCT3\Structures
 

Author: Coasterfreak90
Reuploaded by: Wilhelm1407
NOTE: This set was released at the same time as Coasterfreak90's Mega Coaster Editions.
 

Author: Coasterfreak90
Reuploaded by: Wilhelm1407
 
NOTE: This set was released at the same time as Coasterfreak90's Expedition GeForce &Mega Coaster CTRs.
https://parkcrafters.com/files/file/3378-coasterfreak90s-expedition-geforce-mega-coaster-ctrs/
 
This CS set contains track connectors as well as support pieces that are compatible with Moby's Steel Jungle V1 & V2.
https://parkcrafters.com/files/file/661-mobys-steel-jungle-v1-v2/
 

This pack contains five custom B&M invert trains.
- Generic Recolorable
- Montu Themed
- Black Mamba Themed
- Alpengeist Themed
- No-Limits "Shark" Themed
 
Original Creator: Old Spice

That is the correct spelling, it is based off of a ride in the Netherlands. This ride uses the robocoaster interface, so yea, the cars can rotate. Billboards and terrain covers can be used to hide the tracks. Be wary, SAVE alot when building this ride. Rotation and changing track pieces may cause a crash.
Original Creator/Author: Dasmatze
Description from: RCTDataBase

This file consists of three drop tower rides with varying height. One of the towers is a hopper perfect for families with the other two being more thrilling.
Original creator/author: ImagineerJohn
Image by: lassoaresrct3

Made by RCTK1.
Credits to @DisneyFan1923 for posting it in the forums.

For anyone looking for a RNRC MGM Limo that works here ya go

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy! 
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/
 

A small collection of tightly-packed mortars, all quarter tile placement. Non-recolorable. Found in the Mortars section of the MixMaster. Extract to Style/Themed!
Originally created by Wastad.

A firework mortar set with several pieces, including MOVING launch points! Can be used with fireworks and lasers. Some elements are recolorable. Most are full tile placement. Can be found in Generic Scenery Items. Extract to Style/Themed!
See video for movement:
Originally created by Wastad.

A collection of graphical fireworks cake mortars. Some are quarter tile, others are full tile. Can be found in Generic Scenery Items. Extract to Style/Themed!
Originally created by Wastad and Pyro Pro

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy! 
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy! 
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/
 

Thunderhead, the GCI wooden coaster from Dollywood, is now avaiable as a CT.
Installs as usual, more in the readme.

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy! 
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. The blueprint with supports, has extra supports I've added on using Moby's Steel Jungle, and CPcisco's B&M Footers. All extra scenery is included in the download. I've also added new HD screenshots. Enjoy! 😃
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy! 
NOTES: This CT has sections of track that are meant for tunnels, and trenches. These sections do not have footers, and are very low to the ground. You will want to lower some of the land after placing the coaster. 
Most of Francescoaster's CTs require SwissCheese's Flat Stations. Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/
 
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy! 
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
This CT has an option to add a loop before the Immelmann inversion.  🙂
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy! 
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/
 
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy! 
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy! 
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/

 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy! 
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. The was a small section of track at the bottom of the entrance, and exit of the hammerhead element, that was missing supports. I've added some with custom scenery, I've included the used cs sets in the download. I've also added new HD screenshots. Enjoy! 
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy! 
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/