RollerCoaster Tycoon 3

A roller coaster named after my cat Pixie. Enjoy! :) 🐈

This was an old request by Cody, a CTR based on Hagrid's Motorbike Adventure but themed as Indiana Jones, as seen on "the Last Crusade".
Includes my experimental CT with drop tracks and reversers add-ons for the ML04.
Note that the DropTrackR (the drop track with backwards launch), and the Reverser16m track pieces, requires special caution when used, don't place it immediately before or after a station, or block brake section, and you can expect problems with the "Block Section" mode crashing the game when using these. Please test layouts in an empty park before using in production park files if you're planning to use these track sections. The normal drop track seems completely stable.
Requires the ML04 CT to be installed (it's included in the PEP Europa Park add-on part 1).

I am so back, with another reupload.
This one's of RCTK1's Cheetah Hunt custom track.
Enjoy!

this is a very accurate recreation of Dorney Park in AllenTown PA and this park was made by:hockeyguy22229 from rctgo
here are the list of cs that you will need:
-ATHCatwalk and Accessories set
-BigBurger's Timber 2.0
-CTRS-Paths2
-DasMatze_Invisible Entrance
-Gadget's Coaster Goodies
-KLN-Framework
-Moby's Steel Jungle V1 and V2
-NYRBox Supports
-pteri Tunnel pack
-Jcat's Pumper Steelworx
-shy-Rock Set
-SK-Canopy101
-SK-Hangar51
-SK-HGR71
-SK-M31
-SK-SHR91 
(the only CFR that you Need is Imagineer Johns hopper)

a no cs recreation of wild mouse at cedar point

Author: RCT3-Advanced
Reuploaded by: RobertaME & Wilhelm1407
⭐ Special thanks to RobertaME for finding this CFR in her files, because the original download links were all broken.  I created a new read me file with installation instructions, and made some more screenshots. 

this is a Fictional Six Flags Park located in Chardon Ohio
here our the CS that I used
Gadget's Drop Tower
FC Star Flyer
Cinipaes Pinfari CT
Cinipaes Arrow Corkscrew
FC Invert and Attica Hyper Coaster
CFH Rides Samba Balloon and Reverse Freefall coaster
Coasterinc's Intamin Impulse CT
A station Cs pack that i do not remember the name
so enjoy the park.

Chriz's Paradise Pier set, old and new.

Not my recreation; made by Rexar4living. Was hosted on Realtycoon3.

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy! 
⚠️ WARNING: This CT will not work if you have shadows enabled.  If you have shadows enabled the game will crash. Once you disable shadows you can use this CT. 
💡 NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy! 
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/

 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy! 
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/

 

this was taken from Rctgo by Rct3Players and it is really good and a lot of CS.

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy! 
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy! 
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy! 
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy! 
NOTE: Most of Francecoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy! 
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy! 
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy! 
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy! 
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy! 
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy! 
NOTE: Most of Francecoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/
 

Author: Francecoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy! 
NOTE: Most of Francecoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/
 

This is the second part of the pack :))