RollerCoaster Tycoon 3

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. The blueprint with supports, has extra supports I've added on using Moby's Steel Jungle, and CPcisco's B&M Footers. All extra scenery is included in the download. I've also added new HD screenshots. Enjoy! 😃
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy! 
NOTES: This CT has sections of track that are meant for tunnels, and trenches. These sections do not have footers, and are very low to the ground. You will want to lower some of the land after placing the coaster. 
Most of Francescoaster's CTs require SwissCheese's Flat Stations. Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/
 
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy! 
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
This CT has an option to add a loop before the Immelmann inversion.  🙂
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy! 
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/
 
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy! 
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy! 
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/

 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy! 
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. The was a small section of track at the bottom of the entrance, and exit of the hammerhead element, that was missing supports. I've added some with custom scenery, I've included the used cs sets in the download. I've also added new HD screenshots. Enjoy! 
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy! 
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/

 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy! 
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy! 
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. The brake run catwalk was missing, but it still had some of the frame for it, in the supports folder. I added a catwalk by using GRP's B&M Catwalks & Coaster Goodies, and CSF's Steel I Beam Set. 
Lastly I've added new HD screenshots. Enjoy!  🙂
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy! 😃
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/
 

CT recreation of Baron 1898 at Efteling.
Read the readme included for ride event setup.

A small, 1x1 (center tile) laser emitter. Fires in 8 cardinal directions. Non-recolorable, found in the Structures scenery category.
Originally created by MGL.

This old CT of mine allows you to install a custom height Star Flyer ride (also known as Sky Screamer in Six Flags) in your RCT3 Parks!
Included are some CS to use as top piece decorations for the tower, and a ride version with lights.
It doesn't include a ride platform, but you can easily build one with any pathcover set.
The car allows for both clockwise and counterclockwise rotation.
Have fun!

A roller coaster named after my cat Pixie. Enjoy! :) 🐈

This was an old request by Cody, a CTR based on Hagrid's Motorbike Adventure but themed as Indiana Jones, as seen on "the Last Crusade".
Includes my experimental CT with drop tracks and reversers add-ons for the ML04.
Note that the DropTrackR (the drop track with backwards launch), and the Reverser16m track pieces, requires special caution when used, don't place it immediately before or after a station, or block brake section, and you can expect problems with the "Block Section" mode crashing the game when using these. Please test layouts in an empty park before using in production park files if you're planning to use these track sections. The normal drop track seems completely stable.
Requires the ML04 CT to be installed (it's included in the PEP Europa Park add-on part 1).

I am so back, with another reupload.
This one's of RCTK1's Cheetah Hunt custom track.
Enjoy!

this is a very accurate recreation of Dorney Park in AllenTown PA and this park was made by:hockeyguy22229 from rctgo
here are the list of cs that you will need:
-ATHCatwalk and Accessories set
-BigBurger's Timber 2.0
-CTRS-Paths2
-DasMatze_Invisible Entrance
-Gadget's Coaster Goodies
-KLN-Framework
-Moby's Steel Jungle V1 and V2
-NYRBox Supports
-pteri Tunnel pack
-Jcat's Pumper Steelworx
-shy-Rock Set
-SK-Canopy101
-SK-Hangar51
-SK-HGR71
-SK-M31
-SK-SHR91 
(the only CFR that you Need is Imagineer Johns hopper)

a no cs recreation of wild mouse at cedar point

Author: RCT3-Advanced
Reuploaded by: RobertaME & Wilhelm1407
⭐ Special thanks to RobertaME for finding this CFR in her files, because the original download links were all broken.  I created a new read me file with installation instructions, and made some more screenshots. 

this is a Fictional Six Flags Park located in Chardon Ohio
here our the CS that I used
Gadget's Drop Tower
FC Star Flyer
Cinipaes Pinfari CT
Cinipaes Arrow Corkscrew
FC Invert and Attica Hyper Coaster
CFH Rides Samba Balloon and Reverse Freefall coaster
Coasterinc's Intamin Impulse CT
A station Cs pack that i do not remember the name
so enjoy the park.

Chriz's Paradise Pier set, old and new.

Not my recreation; made by Rexar4living. Was hosted on Realtycoon3.