RollerCoaster Tycoon

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. The blueprint with supports, has extra supports I've added on using Moby's Steel Jungle, and CPcisco's B&M Footers. All extra scenery is included in the download. I've also added new HD screenshots. Enjoy! 😃
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy! 
NOTES: This CT has sections of track that are meant for tunnels, and trenches. These sections do not have footers, and are very low to the ground. You will want to lower some of the land after placing the coaster. 
Most of Francescoaster's CTs require SwissCheese's Flat Stations. Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/
 
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy! 
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
This CT has an option to add a loop before the Immelmann inversion.  🙂
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy! 
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/
 
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy! 
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy! 
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/

 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy! 
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. The was a small section of track at the bottom of the entrance, and exit of the hammerhead element, that was missing supports. I've added some with custom scenery, I've included the used cs sets in the download. I've also added new HD screenshots. Enjoy! 
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy! 
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/

 

Hello! :D
I got inspired to make some portable roller coasters. This time, I just wanted to make a recreation of the Galaxi model. I would have liked to use a custom combination of track and trains, but for a track file it's impossible. The best that I can figure out is using the corkscrew roller coaster: the track is kinda similar, and the trains work decently.
Done without cheat or custom scenery.
See final screenshot for statistics.
I hope you like it. :D

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy! 
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy! 
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. The brake run catwalk was missing, but it still had some of the frame for it, in the supports folder. I added a catwalk by using GRP's B&M Catwalks & Coaster Goodies, and CSF's Steel I Beam Set. 
Lastly I've added new HD screenshots. Enjoy!  🙂
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy! 😃
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations. 
Please download and install before using this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/
 

CT recreation of Baron 1898 at Efteling.
Read the readme included for ride event setup.

A small, 1x1 (center tile) laser emitter. Fires in 8 cardinal directions. Non-recolorable, found in the Structures scenery category.
Originally created by MGL.

Hello! :D
I got inspired to make some portable roller coasters. My second one of that kind is a coaster of the style of D. H. Morgan. My goal was to make a tall roller coaster in a compact format that can be transported around, and I think I succeeded at it. It also is decently long for that coaster type and includes a transfert track and a storage station, since I saw that Olympia Looping had one.
This coaster is more of a concept for a portable Morgan coaster since I don't think it could be done in real life because of its size.
Done without cheat or custom scenery.
See final screenshot for statistics.
I hope you like it. :D

Hello! :D
I got inspired to make some portable roller coasters. My first one of that kind is a coaster of the style of Schwarzkopf. I was inspired by Olympia Looping, however trying to make a blueprint of that exact coaster would make a quite big layout, so I made it smaller and only used 2 loops. Even with those limitations, I managed to make a layout that I was happy with.
When I was experimenting with the layout, I kept two versions that I liked: a small version and a big version. This is the big version.
Done without cheat or custom scenery.
See final screenshot for statistics.
I hope you like it. :D

Hello! :D
I got inspired to make some portable roller coasters. My first one of that kind is a coaster of the style of Schwarzkopf. I was inspired by Olympia Looping, however trying to make a blueprint of that exact coaster would make a quite big layout, so I made it smaller and only used 2 loops. Even with those limitations, I managed to make a layout that I was happy with.
When I was experimenting with the layout, I kept two versions that I liked: a small version and a big version. This is the small version.
Done without cheat or custom scenery.
See final screenshot for statistics.
I hope you like it. :D

This old CT of mine allows you to install a custom height Star Flyer ride (also known as Sky Screamer in Six Flags) in your RCT3 Parks!
Included are some CS to use as top piece decorations for the tower, and a ride version with lights.
It doesn't include a ride platform, but you can easily build one with any pathcover set.
The car allows for both clockwise and counterclockwise rotation.
Have fun!

A roller coaster named after my cat Pixie. Enjoy! :) 🐈

This was an old request by Cody, a CTR based on Hagrid's Motorbike Adventure but themed as Indiana Jones, as seen on "the Last Crusade".
Includes my experimental CT with drop tracks and reversers add-ons for the ML04.
Note that the DropTrackR (the drop track with backwards launch), and the Reverser16m track pieces, requires special caution when used, don't place it immediately before or after a station, or block brake section, and you can expect problems with the "Block Section" mode crashing the game when using these. Please test layouts in an empty park before using in production park files if you're planning to use these track sections. The normal drop track seems completely stable.
Requires the ML04 CT to be installed (it's included in the PEP Europa Park add-on part 1).

I am so back, with another reupload.
This one's of RCTK1's Cheetah Hunt custom track.
Enjoy!

this is a very accurate recreation of Dorney Park in AllenTown PA and this park was made by:hockeyguy22229 from rctgo
here are the list of cs that you will need:
-ATHCatwalk and Accessories set
-BigBurger's Timber 2.0
-CTRS-Paths2
-DasMatze_Invisible Entrance
-Gadget's Coaster Goodies
-KLN-Framework
-Moby's Steel Jungle V1 and V2
-NYRBox Supports
-pteri Tunnel pack
-Jcat's Pumper Steelworx
-shy-Rock Set
-SK-Canopy101
-SK-Hangar51
-SK-HGR71
-SK-M31
-SK-SHR91 
(the only CFR that you Need is Imagineer Johns hopper)

a no cs recreation of wild mouse at cedar point