RollerCoaster Tycoon 3

Originally posted in the Spring of 2012, SFAA is a park ready to bloom. It just needs the hands of a good host, and it will be set. Unfortunately this is only the entrance bench, therefore you will be missing a large majority of the park (I've misplaced a lot of it).
Author: liam

A park from 2011 that was a community game. Based in Washington State, Higgins is a small seaside pier with room for expansion.
Author: liam

Just a small park with a few rides and a B&M Flyer
Author: Tomes1225

Islands of Adventure: Port of Entry
Place your entrance where you like and start building your own Island of Adv
I have included a list of CSOs as well as the park file, images, and a read-me in the download.
Enjoy  
Author: -P3-

Author: Francescoaster
Reuploaded by: Wilhelm1407 
I have taken new HD screenshots as well as added an instructional Read Me file for how to install this CT.
I have also added blueprint track files both with and without supports.  Enjoy! 😀
NOTE:  Most of Francescoaster's CTs require SwissCheese's Flat Stations. Please install before downloading this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/

Author: Francescoaster
Reuploaded by: Wilhelm1407 
This CT is a recreation of  Python at Efteling. I have taken new HD screenshots, as well as added an instructional Read Me file on how to install this CT. I have also added blueprint track files both with and without supports. This will make the CT much easier to use for many players. Enjoy! 😀 
NOTE:  Most of Francescoaster's CTs require SwissCheese's Flat Stations. Please install before downloading this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have taken new HD screenshots as well as added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports.
This will make the CT much easier to use for many players. Enjoy!  😀
NOTE:  Most of Francescoaster's CTs require SwissCheese's Flat Stations. Please install before downloading this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/

Author: Francescoaster 
Reuploaded by: Wilhelm1407
I have taken new HD screenshots as well as added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports.
This will make the CT much easier to use for many players. Enjoy!  😀
NOTE:  Most of Francescoaster's CTs require SwissCheese's Flat Stations. Please install before downloading this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files, both with and without supports. This will make the CT much easier to use for many players. 
I've also taken new HD screenshots. Enjoy! 😀
NOTE:  Most of Francescoaster's CTs require SwissCheese's Flat Stations. Please install before downloading this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files, both with and without supports. This will make the CT much easier to use for many players. 
I've also taken new HD screenshots. Enjoy! 😀
NOTE:  Most of Francescoaster's CTs require SwissCheese's Flat Stations. Please install before downloading this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/

Re-uploaded. Made by CFH-Rides.

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have taken new HD screenshots as well as added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports.
This will make the CT much easier to use for many players. 
Vekoma SLC 765's layout contains the optional helix finale. 
Vekoma SLC 689's layout does not contain a helix finale.  
Enjoy! 😀
NOTE:  Most of Francescoaster's CTs require SwissCheese's Flat Stations. Please install before downloading this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports.
This will make the CT much easier to use for many players. I've also taken new HD screenshots. Enjoy! 😀
NOTE:  Most of Francescoaster's CTs require SwissCheese's Flat Stations. Please install before downloading this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports.
This will make the CT much easier to use for many players. I've also taken new HD screenshots. Enjoy!  😀 
NOTE:  Most of Francescoaster's CTs require SwissCheese's Flat Stations. Please install before downloading this CT. 
https://parkcrafters.com/files/file/1651-flat-stations/
 
 
 
 

TexMod is a free application that will temporarily replace any texture in RCT3 without the need to use an application specific modding tool and without replacing any files in your RCT3 installation, but during gameplay will give the appearance that there are new textures.  TexMod is an executable and needs no installation.
To Use:
With RCT3 closed, launch TexMod.  While in TexMod: Click on the folder icon at the top left where it says Target Application and browse to your RCT3 .exe file.  Select your .exe file. Select Package Mode in TexMod.  Package Mode is usually already selected by default. Browse to the folder where you have already stored your .tpf extension TexMod files and select the files you want to load. Select Run. TexMod will launch RCT with the new textures in place of the in-game textures. RCT3 needs to be closed before reloading different textures or to play RCT3 without TexMod textures that have been loaded. The use of TexMod is not endorsed or supported by any games company for any of its games.
Created by RSToff.

RCT3 File Importer Copyright 2005 Jonathan Wilson
The RCT3 File Importer is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free
Software Foundation; either version 2, or (at your option) any later
version. See the file COPYING for more details.

I've been working with path creater by darkhorizon. This is what I managed to create. I hope you like it. Created by delpaint.

Just used the Queues Creator. See what you think. Created by delpaint.

Three custom paths.
-Aqua
-Industrial
-Skywalk
Created by Old-Spice.

Here is what i have so far.
4h
3h
2h
1h
above heights diagonal
1x1m
2x2m
small inside turn
small outside turn
medium turn
large turn parts 1 and 2
DONT USE BLOOM!!! the green will go everywhere and mess up your greenscreen....happy editing! Created by KrakatoaCoo.

A retexture that makes the in-game ugly looping coaster track brighter and more "glossy"! Please make sure to read the read me otherwise your game will almost indefinitely crash.
The retexture applies to the Looping Roller Coaster, and LIM Launched Coaster. It does not apply to Dizzy Dropper, Rotating Tower Coaster.
The retexture also swaps the railing color with the support color, so you'll have to recolor rides.
Please note that this was made by DJF Tycoon. Full credit goes to him, as this is just a re-upload of a cool retexture.

"Fantoma Hill" is a haunted house themed facade, for your creepy ride or haunted park. Includes a small garden and a small cemetery. CS list is included.
Add the .dat file to your My Documents -> RCT3 -> Structures.
Have fun! Created by SaltyPeppers_.

"The Wave" is an entrance building, themed to look like a wave. Includes turnstiles and ticket booths. CS list is included.
Add the .dat file to "My Documents" -> RCT3 -> Structures.
Have fun! Created by SaltyPeppers_.

"The Academy" is an entrance building, which includes turnstiles. CS list is included.
Add the .dat file to "My Documents" -> RCT3 -> Structures.
Have fun! Created by SaltyPeppers_.

It’s a set of the recreation (or I tried) of some of the buildings of the Horyuu-ji Buddhist temple complex of Nara, Japan.
It also contains pieces to build your own pagoda.
All the buildings are empty inside and are sorely decoration, but you can combine them with rides or stalls or whatever. The Five Storey Pagoda is somewhat graphic heavy it might cause lower end computers to lag.
Scenery sets needed (beside the standard in-game sets):
Ralfvieh’s East Asia
Ralfvieh’s Beaver Homes
Ralfvieh’s Antique World
Ralfvieh’s Medieval 1-2
Ralfvieh’s New Castle 1-2
Ropes by Elch
Building and their sizes:
Five storey Pagoda (5x5 squares)
Belfry (2x2 squares)
Golden Hall (7x6 squares)
Yume Dono (4x4 squares)
Main Gate (5x3 squares)
Wall piece (3x1 squares)
Wall piece corner (2x2 squares)

Put them to Documents/RCT3/Structures
Created by Sora_92.