RollerCoaster Tycoon 3

Torch created for wolfpaw's Epcot project and IllumiNations: Reflections of Earth. Created by Stickygum32!

This tool when used allows RCT3 to increase its memory from 2GB to 4GB allowing for larger park files, more complex files, and less crashes. This tool is useless if you are using 32-bit, only use this tool if you are on 64-bit.
How to use:
Download the tool and run the .exe file Click on the three dots where it says 'Select an Executable' Navigate to and select RCT3.exe (This will be located wherever you have your RCT3 installed) Check mark the box that says 'Large Address Aware Flag' Click on Save Your game will now use double the memory!

Its The Season And Its Time To Use The Christmas Decorating At Its Finest.
Challenge Is Make A Thriving Winter Wonderland Hyde Park Inspired Area At This Snowy National Park.
VIP Guest Will Visit Don't Worry There Is No Challenges For Them.
Do What You Want Make The Best Christmas Market/Funfair Event.
Enjoy Happy Holidays And Merry Xmas.
There Is A Image With The Download For The Entrance Billboards Put It Into My Pictures And Your Good To Go. 
 

Vekoma mine train with no mods.
 

Excitement Rating: 16.72
Intensity Rating: 4.18
Nausea Rating: 2.68
This is my recreation of the Meisho Double Looping Coaster.
The trains used are Arrow and Vekoma Corkscrew CTR.
CSO Items you need to download like:
ATH Catwalk Set
JCat's Steelworx
shyguys Circus Center Set
The Coaster Essentials: Brakes
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. The screenshots were created using sets by djF and Weber.
https://parkcrafters.com/files/file/129-webers-foliage-set-11/
https://parkcrafters.com/files/file/1-realistic-ground-textures/
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations.
Please download and install before using this CT.
https://parkcrafters.com/files/file/1651-flat-stations/
 
 
 
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy!
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations.
Please download and install before using this CT.
https://parkcrafters.com/files/file/1651-flat-stations/

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy!
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations.
Please download and install before using this CT.
https://parkcrafters.com/files/file/1651-flat-stations/
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy!
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations.
Please download and install before using this CT.
https://parkcrafters.com/files/file/1651-flat-stations/

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy!
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations.
Please download and install before using this CT.
https://parkcrafters.com/files/file/1651-flat-stations/
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy!
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations.
Please download and install before using this CT.
https://parkcrafters.com/files/file/1651-flat-stations/
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy!
NOTE: This CT is has unpainted wooden supports, due to the fact it's based on the concept animation released by Six Flags prior to the coaster opening.
Regardless the supports are superb!
(Concept animation pictured below)

Also most of Francescoaster's CTs require SwissCheese's Flat Stations.
Please download and install before using this CT.
https://parkcrafters.com/files/file/1651-flat-stations/
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy!
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations.
Please download and install before using this CT.
https://parkcrafters.com/files/file/1651-flat-stations/
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy!
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations.
Please download and install before using this CT.
https://parkcrafters.com/files/file/1651-flat-stations/
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy!
NOTE:
This CT has a drop into a trench, and also must be partly in a body of water for the splash down to work.
See attached screenshot called "Trench Placement" for the optimal dimensions and depth of each trench.  
Also most of Francescoaster's CTs require SwissCheese's Flat Stations.
Please download and install before using this CT.
https://parkcrafters.com/files/file/1651-flat-stations/
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy!
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations.
Please download and install before using this CT.
https://parkcrafters.com/files/file/1651-flat-stations/
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy!
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations.
Please download and install before using this CT.
https://parkcrafters.com/files/file/1651-flat-stations/
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy!
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations.
Please download and install before using this CT.
https://parkcrafters.com/files/file/1651-flat-stations/
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy!
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations.
Please download and install before using this CT.
https://parkcrafters.com/files/file/1651-flat-stations/
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy!
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations.
Please download and install before using this CT.
https://parkcrafters.com/files/file/1651-flat-stations/
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy!
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations.
Please download and install before using this CT.
https://parkcrafters.com/files/file/1651-flat-stations/
 

Author: Francescoaster
Reuploaded by: Wilhelm1407
I have added an instructional Read Me file for how to install this CT. I have also added blueprint track files both with and without supports. I've also added new HD screenshots. Enjoy!
NOTE: Most of Francescoaster's CTs require SwissCheese's Flat Stations.
Please download and install before using this CT.
https://parkcrafters.com/files/file/1651-flat-stations/
 

When placed, this very tongue in cheek little shop has the following items for peeps to purchase:
    1) The_Cook's hat (white chef's togue)
    2) Shyguy's Balloon (ShyGuy's avatar shaped balloon)
    3) Vodhin's Umbrella
    4) Bowl of MarnetMunchies
        with optional "toppings":
        -Biogallies (?)
        -Skipperoos (?)
        -Crowsfeet (?)
    5) Jonwil's OVL-Decoding Glasses
    6) Jcat's Pumperpunch
        with optional "topping":
        -ElectroKlinns (?)
    
    
INSTALL/USE:
    
    1) Copy contents inside folder "CarriedItems":
    "BelgaborsCarriedItems.common.ovl" and "BelgaborsCarriedItems.unique.ovl" into RCT3 install directory => "CarriedItems".
    
    2) Copy folder "MemorabilitiesShoppe" into RCT3 install directory => "Custom" => "Belgabor".
    -If there is no folder named "Belgabor" - you need to create one, and then copy the folder "MemorabilitiesShoppe" in it.
    - OR copy entire folder named "Belgabor" into RCT3 install directory => "Custom".
    
    After install the shop/stall will be in-game under "Shops and Facilities" => "Stalls" named "Ye Olde Custom Shoppe".
    
    
SPECIAL NOTE by Traveller: This set is composed of two found and rescued folders from a broken HDD, and it took forever to reconstruct the set, as there were no readme or any info about this set, let alone information that these two folder are part of one and same set.
Tested to be fully working once installed properly. As far as I know, this set is not available for download anywhere.
    
    
        
AUTHOR/CREATOR: Belgabor
 

Completley full sandbox, built over a couple of months. 
No mods or custom scenery needed 

SET CONTENTS:
    17 Static Animals:
    - Crocodile
    - Dromedary (one-humped camel)
    - Female Elephant
    - Male Elephant
    - Baby Elephant
    - Giraffe
    - Lama
    - Leopard
    - Female Lion
    - Male Lion
    - Wolf
    - Black Panther
    - Seal
    - Penguin
    - Rhinoceros
    - Tiger
    - Zebra
    + 1 medium size desert rock

INSTALL/USE: Copy folder "safari" into RCT3 install directory => Style => Themed
Items will be in-game under "Scenery Items", named "Safari"
PLEASE NOTE: Each item occupies whole 1x1 square. Some items have LOD issues.
 
AUTHOR/CREATOR: Lulujarre